Vision Spinner Variable Voltage Battery (650mAh)
The "New" Vision Spinner is the same battery but with an updated look.
The very popular Vision Spinner battery allows you to adjust voltage output from 3.3v to 4.8v by spinning the knob at the bottom. It comes with 510/eGo threading which works with a variety of 510/eGo threaded atomizers, tanks systems, and clearomizers/cartomizer.
- The Spinner battery should only be charged with the eGo USB Rapid charger.
- Using the battery at a higher voltage output will drain the battery faster than at a lower voltage. We suggest you to start with a low voltage and increase the voltage gradually until you find the right voltage for your atomizer/cartomizer.
- 5 Click Safety Feature - Press the button 5 times within 2 seconds to activate or deactivate the battery. The LED will flash upon successful activation or deactivation. Batteries are shipped in the off position.
- This battery has an 10 seconds cut-off time. If the button is pressed for 10 seconds, the battery will shut off until the button is released.
- Short Circuit Protection: When a short is detected, the battery will shutdown until the short is removed.
- Low Voltage Protection: When the battery voltage is lower than 3.3v, the battery will shut down.
- Over-Discharge Protection: The device will monitor the battery voltage and automatically turn off when the battery is discharged, preventing damage to the battery by overly depleting it. The LED will blink 5 times indicating that a charge is need.
Unit: 1 pc
Color: Available in Matte Black and Stainless