Innokin iTaste VV V3.0
Innokin iTaste VV V3.0 is a microprocessor controlled variable-voltage/variable-wattage (VV/VW) personal vaporizer that lets you adjust the voltage or wattage in seconds with just a few button presses. It's quick and easy!
This kit includes:
- (1pc) Innokin iTaste VV V3.0 VV/VW Battery
- (1pc) Innokin iTaste USB Charger
- (1pc) Manual(English)
- Variable Voltage - Voltage can be adjusted from 3.3 - 5.0 volts in .1 volt increments.
- Variable Wattage - Wattage can be adjusted from 6.0 - 11.0 W in .5 watts increments.
- Ohm Meter - Resistive load detection.
- Puff Counter - The puff counter will record how many puffs you have taken. The records will be cleared when the device is turned off.
- Short Circuit/Atomizer Protection - Short circuit/atomizer protection helps protect the iTaste VV against faulty atomizers.
- Over-Discharge Protection - The iTaste VV monitors the battery voltage and will automatically turn off when the battery is discharged.
- LED Battery Indicator - The iTaste VV battery utilizes an advanced capacity display via green, yellow and red LED lights. Users will know the battery’s capacity via the color of the LED Button. The LED lights will show green, yellow or red to indicate full battery life, half capacity or charging needed.
- Superior Battery Life - the iTaste VV e-cigarette features a built-in 800 mAh polymer Li-Ion rechargeable battery.
- 510 Threaded - it comes with a standard eGo connector, so it is compatible with 510/eGo/eGo-T/eGo-C products.
- ON/OFF Battery Switch - quickly clicking the button three times will power the device on or off. Once the device is on, holding down the button will activate the battery. This safety feature prevents the atomizer from turning on while it's in your pocket or bag, as well as inadvertent settings changes.
- 10-Second Cut-off - If the button is held down for more than 10 seconds, the iTaste VV will shut itself off until the button is released.
- Pass-through - The iTaste VV is charged through a Micro USB Port. You can recharge it with any standard MicroUSB cable. It can also work as a pass-through device for simultaneous vaping and charging.
- Settings Retention - The device remembers the last voltage or wattage used when switching batteries.
- Display Information - The bright display shows resistance (ohms), voltage, wattage, atomizer voltage output, puff count, and last-used settings.
Unit: 1 Kit
Battery size: 15mm x 15mm x 105mm
Battery Capacity: 800mAh
Battery Color: Black/White/Chameleon/Pearl Chrome
Warranty: 21 days for battery and charger.